Minolta DYNAX 7 - Page 16

16 (2181)
REPAIR GUIDE
■■
■■
■
Fig. 2Fig. 2
Fig. 2Fig. 2
Fig. 2
■■
■■
■
Fig. 3Fig. 3
Fig. 3Fig. 3
Fig. 3
■■
■■
■
Fig. 1Fig. 1
Fig. 1Fig. 1
Fig. 1
COUPLER LEVER SPCOUPLER LEVER SP
COUPLER LEVER SPCOUPLER LEVER SP
COUPLER LEVER SP
AF/M BASEPALTEAF/M BASEPALTE
AF/M BASEPALTEAF/M BASEPALTE
AF/M BASEPALTE
APERTURE RING ASSY Removal/Installation
Removal
Turn APERTURE RING ASSY clockwise until it stops (Fig. 1). Now the ring can be removed.
Be careful not to turn the aperture coupling gear in APERTURE BASEPLATE ASSY.
Installation
1. Set APERTURE BASEPLATE ASSY to the default charge position referring to Charge Position Setting
procedure (pg 18.), then install to FRONT FRAME ASSY.
APERTURE BASEPLATE ASSY is at the charge completion position if it has never been removed, or the
aperture coupling gear has not been turned after removing APERTURE RING ASSY.
2. Install APERTURE RING ASSY so that the punch mark is positioned as illustrated. (Fig. 1)
APERTURE RING ASSYAPERTURE RING ASSY
APERTURE RING ASSYAPERTURE RING ASSY
APERTURE RING ASSY
Punch markPunch mark
Punch markPunch mark
Punch mark