Minolta DYNAX 7 Repair Guide

38 (2181)
REPAIR GUIDE
■■
■■
■
Fig.1Fig.1
Fig.1Fig.1
Fig.1
■■
■■
■
Fig.2Fig.2
Fig.2Fig.2
Fig.2
■■
■■
■
Fig.3Fig.3
Fig.3Fig.3
Fig.3
SPC Position Adjustment
Peform this adjustment without TOP COVER ASSY, after disassembling from step 1 to step 9 in P.4, by
using Remote cord.
Equipment Required
Master Lens
HIT Controller
ROM Pack for 2181
Contact Jig for 2181
Contact Jig Cable
I/F Box for HIT
SPC Chart for 2181
Remote-cord
Adjustment
1. Set up the equipment as in Fig. 1.
2. Select "AE ADJ." from the main menu and press SELECT Button.
3. Select "SPC ADJ." from the menu and press SELECT Button.
4. Press Shutter-release Button partway down. (S1 ON)
5. Adjust the position of SPC1 HOLDER ASSY so that mark "◆" comes inside the white area in the
display. (Fig. 2)
Apply B-20 to the designated position as in Fig. 3 when adjustment is complete.
6. Press SELECT Button while pressing and holding Shutter-release Button partway down (S1 ON) to
return to the previous menu.
2181 SPC Chart2181 SPC Chart
2181 SPC Chart2181 SPC Chart
2181 SPC Chart
■■
■■
■
Align Spot Metering Circle withAlign Spot Metering Circle with
Align Spot Metering Circle withAlign Spot Metering Circle with
Align Spot Metering Circle with
brackets on the chart brackets on the chart
brackets on the chart brackets on the chart
brackets on the chart
Contact jig for 2181Contact jig for 2181
Contact jig for 2181Contact jig for 2181
Contact jig for 2181
and Remote codeand Remote code
and Remote codeand Remote code
and Remote code
Approx. 40.5cmApprox. 40.5cm
Approx. 40.5cmApprox. 40.5cm
Approx. 40.5cm
CAMERACAMERA
CAMERACAMERA
CAMERA
focus mode focus mode
focus mode focus mode
focus mode
：：
：：
：
MFMF
MFMF
MF
Master LensMaster Lens
Master LensMaster Lens
Master Lens
Focus ring Focus ring
Focus ring Focus ring
Focus ring
：：
：：
：
Approx 40cmApprox 40cm
Approx 40cmApprox 40cm
Approx 40cm
I/F BOX for HITI/F BOX for HIT
I/F BOX for HITI/F BOX for HIT
I/F BOX for HIT
HIT ControllerHIT Controller
HIT ControllerHIT Controller
HIT Controller
SPC HOLDER ASSYSPC HOLDER ASSY
SPC HOLDER ASSYSPC HOLDER ASSY
SPC HOLDER ASSY
Set the mark inside the white box.Set the mark inside the white box.
Set the mark inside the white box.Set the mark inside the white box.
Set the mark inside the white box.
contact jig cable contact jig cable
contact jig cable contact jig cable
contact jig cable
From Lens mountFrom Lens mount
From Lens mountFrom Lens mount
From Lens mount

Minolta DYNAX 7 Specifications

General

Camera Type	SLR
Film Format	35mm
Flash Sync Speed	1/200 sec
Sensor Type	N/A (Film Camera)
Sensor Size	N/A (Film Camera)
Effective Pixels	N/A (Film Camera)
Lens Mount	Minolta A mount
Shutter Speed	1/8000 to 30 sec, Bulb
ISO Range	ISO 6 to 6400
ISO Sensitivity	ISO 6 to 6400
Viewfinder	Pentaprism
Storage Media	N/A (Film Camera)