EasyManua.ls Logo

Minolta DYNAX 7 - SELF-TIMER

Minolta DYNAX 7
66 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
46 (2181)
REPAIR GUIDE
EZ Adjustment
Be sure to perform the adjustment for all island groups in series according to the display after replacing
CCD MODULE ASSY.
If ERROR (communication failure with HIT) occurs during adjustment, start over from the item that has
been interrupted. It is unnecessary to start back to the beginning.
When a reading is out of standard at " EZ Check", the single item is selectable at option.
Adjustment
1. Set up the equipment as in Fig. 1.
2. Select "EZ ADJ." from the main menu and press SELECT Button.
3. Press SELECT Button again, then "3rd,4th,6th ISLAND" appears in the display.
Use the appropriate chart according to the desired island group. (See table as follows.)
4. Align the focus frame with the measuring point as in Fig. 2, then press SELECT Button.
5. Press and hold Shutter-release Button partway down after Naviagation Display goes out, so that HIT
Controller beeps and adjustment is finished.
6. Repeat step 4 and step 5 until "OK" appears in the display.
7. Press SELECT Button.
The display is replaced with the EZ menu, and the next island group appears in the display.
8. Repeat step-3 to -7 until "COMPLETE" appears after "2nd,8th ISLAND" adjustment is completed.
9. Press SELECT Button to return to the previous menu.
2nd,8th2nd,8th
2nd,8th2nd,8th
2nd,8th
3rd,4th,6th3rd,4th,6th
3rd,4th,6th3rd,4th,6th
3rd,4th,6th
5th5th
5th5th
5th
1st,7th1st,7th
1st,7th1st,7th
1st,7th
FigFig
FigFig
Fig
11
11
1
FigFig
FigFig
Fig
22
22
2
When checking the reading at 2nd island group and 8th island group,
use AF Chart-II for 2163 upside down.
AF Chart-I for 2163AF Chart-I for 2163
AF Chart-I for 2163AF Chart-I for 2163
AF Chart-I for 2163
AF Chart-II for 2163AF Chart-II for 2163
AF Chart-II for 2163AF Chart-II for 2163
AF Chart-II for 2163
Island Group Layout Island Group Layout
Island Group Layout Island Group Layout
Island Group Layout
1,955mm1,955mm
1,955mm1,955mm
1,955mm
Lens mount surfaceLens mount surface
Lens mount surfaceLens mount surface
Lens mount surface
AF Master LensAF Master Lens
AF Master LensAF Master Lens
AF Master Lens
CameraCamera
CameraCamera
Camera
Focus mode: MF Focus mode: MF
Focus mode: MF Focus mode: MF
Focus mode: MF
Chart Measurement point
3rd, 4th, 6th ISLAND AF Chart-I for 2163 (Horizontal) A - D
5th ISLAND AF Chart-I for 2163 (Vertical) E - H
1st, 7th ISLAND AF Chart-II for 2163 (Horizontal) I - L
2nd, 8th ISLAND AF Chart-II for 2163 (Horizontal) * M - P
Island group

Table of Contents

Other manuals for Minolta DYNAX 7

Related product manuals