Minolta DYNAX 7 - HIGH-SPEED SYNC

56 (2181)
REPAIR GUIDE
■■
■■
■
Fig. 1Fig. 1
Fig. 1Fig. 1
Fig. 1
Camera:Camera:
Camera:Camera:
Camera:
Master Lens: focus infinteMaster Lens: focus infinte
Master Lens: focus infinteMaster Lens: focus infinte
Master Lens: focus infinte
Luminance boxLuminance box
Luminance boxLuminance box
Luminance box
：：
：：
：
Brightness: listed aboveBrightness: listed above
Brightness: listed aboveBrightness: listed above
Brightness: listed above
Adjustment of the AE (AE)
Required equipment
Luminance box
L-2101/L-2111 or multi camera tester: EF-8301
Master Lens
PC with preinstalled the 2181 adjustment program
CF card for Adjustment
USB-2 (USB cable)
AC Adapter AC-11
Preparation of the adjustment
1. Set camera to adjustment mode.
Refer to Starting up the 2181 adjustment program (in the adjustment mode) in P. 49.
2. Set the camera and the measuring instrument as shown on the Fig.1.
Procedure of the adjustment
1. Click "AE" of the adjustment menu.
2. According the displayed information in the window, set the brightness of the luminance box and then
click OK.
3. Repeat step 2 5 times, with brightness EV 6, EV 15, EV 10, EV 6 again and EV 15 again.
4. The adjustment is completed when "OK" is displayed on the adjustment menu.