Minolta DYNAX 7 - FOCUS AREA

30 (2181)
REPAIR GUIDE
Required adjustment, setting and confirmation items after repairing (exchanging parts)
Adjust, set and confirm as the following table when the following parts are removed (exchanged).
Follow the steps from the upper line to adjust.
Removed Replaced Removed Replaced Removed Replaced Removed Replaced Removed Replaced Removed Replaced
Viewfinder Back
○○○○○○○○○○○○
SPC Position
Manual Set SS
○○○○ ○○○○
PI-PR
○
Aperture Preset
○○
AF Area
○○○○○○○○○○○○
PITCH, YAW
○○○○○○○○○○○○
EZ
○○○○○○○○○○○○
CCD Vsub
○○
CCD Aori and Center
○○○○○○○○○○○○
ACT DRV FREQ
○○
SERVO GAIN
○○
GYRO
○○
AE
GAIN
DEFECT PIXEL
○○
WB
○○
SHAKE GAIN
○○
Resolving Power
○○○○○○○○○○○○
Exposure Accuracy
○○○○○ ○ ○
Exposure Accuracy with
Built-in Flash
○○○○○ ○ ○
Grayscales
○○
Color Reproduction
○○
Current Consumption
○○○○○○
B.C. Voltage
○○
Removed Replaced Removed Replaced Removed Replaced Removed Replaced Removed Replaced Removed Replaced
Viewfinder Back
○○○○○○○○○○○○
SPC Position
Manual Set SS
○○○○○○○○
PI-PR
○○○
Aperture Preset
○○
AF Area
○○○○○○○○○○○○
PITCH, YAW
○○○○○○○○○○○○
EZ
○○○○○○○○○○○○
CCD Vsub
CCD Aori and Center
○○○○○○○○○○○○
ACT DRV FREQ
○
SERVO GAIN
○
GYRO
○○
AE
○○○
GAIN
○
DEFECT PIXEL
○
WB
○
SHAKE GAIN
○○ ○
Resolving Power
○○○○○○○○○○○○
Exposure Accuracy
○○○
Exposure Accuracy with
Built-in Flash
○ ○○○
Grayscales
○
Color Reproduction
○
Current Consumption
○○○○○○
B.C. Voltage
○○
Parts
Adjustment/
REFLECTOR ASSY
(0166)
SHUTTER ASSY
(0220)
APERTURE ASSY
(0250)
CCD MODULE
ASSY (0265)
CCD ASSY
(0271)
IMAGE BOARD
ASSY (0401)
Parts
Adjustment/
FLASH BOARD
ASSY (0404)
I/O FLEXIBLE
ASSY (0406)
GYRO FLEX ASSY
(0414)
DD BOARD ASSY
(0452)
MAIN BOARD ASSY
(0455)
MIRROR BOX ASSY
(0500)