Minolta DYNAX 7 - Distination Seting(DISTINATION)

(2181) 61
REPAIR GUIDE
■■
■■
■
Fig. 1Fig. 1
Fig. 1Fig. 1
Fig. 1
*Always perform the setting and confirming the destination.
Setting of Destination (DESTINATION)
Required equipment
PC with preinstalled the 2181 adjustment program
CF card for Adjustment
USB-200 (USB cable)
AC Adapter AC-11
Preparation of the adjustment
Set camera to adjustment mode.
Refer to Starting up the 2181 adjustment program (in the adjustment mode) in P. 49.
Procedure of the adjustment
1. Click down arrow under the DESTINATION in adjustment menu and select required destination
from the item list.
Destionation: Europe/Japan/USA/China
2. Click SET button under DESTINATION after selecting required destination.
Then The destination setup has completed is deisplayed on the screen and setting is completed.
(Fig. 1)