11 Troubleshooting and Maintenance
soft reset.” The Home screen should
appear after a
Troubleshooting and
Maintenance
11.1 Resetting Your System
Occasionally, you may need to reset your device. For example, you should reset
your system when it stops responding; or appears to be “frozen” or “locked up.”
Insert a small rod, such as a straightened paperclip, into the reset button on the
bottom of your device. This is called a “
soft reset.
If your device still does not respond after a soft reset,
you can use the following
3. Wait for 1 minute and then slide the switch back to the ON (right) position.
steps to perform a “hard reset.”
1. Disconnect all cables, including the AC adapter, from your device.
2. Use a pointed pen to slide the ON/OFF switch to the OFF (left) position.
85
To Next Page
Loading...
