Mirion Technologies RDS-32 - Keypad Use; Keypad Direct Functions

GETTING STARTED
9
2.7 KEYPAD USE
The RDS-32 features a Select key in the middle of the keypad and four surrounding arrow
keys for navigation in the RDS-32 menu:
• ENTER THE MENU by pressing the Select key.
• SCROLL IN THE MENU using the up and down arrow keys.
• MOVE INTO A MENU SECTION by pressing the Select key or the right arrow key.
• SAVE A VALUE, SELECT A FUNCTION, RESET A COUNTER by pressing the Select
key.
• RETURN TO A HIGHER LEVEL in the menu by pressing the left arrow key or wait 15
seconds timeout to return to the Main display.
2.8 KEYPAD DIRECT FUNCTIONS
Keypad direct functions are preprogrammed into the arrow keys. The functions are operational
in the Main display. Inside the menu the keys are reserved for navigation.
Activate a direct function in the Main display by pressing the corresponding arrow key. The
factory set direct functions of the RDS-32 are shown in the below table.
Switch backlight on or off
Mute/Unmute chirp and key buzzer. In warning condition, acknowledges
Audio, vibration and LED signal.
DOSE
Check accumulated dose, press again to check time to dose alarm
User settable function key (with CSW-32 software) Not factory set.