Mirion Technologies RDS-32 - 3 Rds-32 Functionality

RDS-32 FUNCTIONALITY
12
3 RDS-32 FUNCTIONALITY
A quick guide to the menu items is provided below. For detailed operation, see the individual
chapters for each item.
MENU ITEM
FUNCTION
OFF
Switch off the meter.
DOSE
Check and reset the current accumulated dose value.
MaxDR
Check and reset the current maximum recorded dose rate since last
reset.
CHIRP
Adjust the sensitivity of the visual and audible pulse indication or
switch them ON/OFF.
ALARM
Set dose and dose rate alarm levels and choose the alarm mode:
single, dual or off
EXT.AL
Shown only if an external probe is connected:
Check and change the external probe alarm levels.
TM.2.AL
Time left to reach the dose alarm in the current dose rate field.
DIAG
Activate the internal diagnostics, check software revision and
battery capacity
COMM
WRM connection settings, BLE*
HISTO
Make the histogram data collection settings or clear saved data,
save the current results and status manually.
SCALER
Set an integration time/count, acquire current background and start
net or gross acquisition over time.
PROBE
Shown only if an external probe is connected:
Check and change the probe settings such as probe type or
measurement unit.
*The WRM settings are in use in iTx radio models or when the RDS-32 data is being sent over local area
network or as serial communication. The device has additionally BLE readiness.
The RDS-32 has a tilt sensor so that in the menu, the display can be rotated by tilting the device. This feature is
not operational when an external probe is connected.
The lightbulb symbol will appear from time to time in the coming chapters to indicate a
helpful tip for the user.