RDS-32 FUNCTIONALITY
28
3.9.2 CLEAR
The histogram memory can be cleared by navigating into the HISTO menu and selecting
CLEAR. The user will be prompted to confirm by displaying SURE? Press the Select key
again to confirm erasing the collected histogram data.
3.9.3 PERIOD
The period of storing measurement results to the histogram can be set by navigating into
PERIOD in the HISTO menu. The time between saving results into the histogram memory
can selected from the predefined list in this menu by pressing the Select key. The intervals
available are 10 s, 20 s, 1 min, 5 min, 10 min, 30 min, 1 h and 2 h.
3.9.4 LOCATION
A location can be stored as additional information to the histogram. There are up to 255
numbered locations. Using the CSW-32 Configuration Software it is possible to specify
mnemonic or longitude and latitude values for the first 16 locations.
To Next Page
Loading...
