GETTING STARTED
10
2.9 PARAMETER SETTINGS
The parameters of the device can be changed using the menu functions described later in this
manual. The CSW-32 Configuration software can be used to simplify the operation or limit
access to some parameter settings, like alarm levels. By default all the menu functions
available are visible in the RDS-32 meter.
The CSW-32 Configuration Software offers some additional settings to functions available on
the meter itself. For example, the backlight can be set as continuously on in the software.
Also, the alarm methods (LED, audio and vibration) in use can be selected in the software.
See the CSW-32 configuration software manual for details.
The menu configuration window of the CSW-32 software.
To Next Page
Loading...
