Mirion Technologies RDS-32 - Page 20

RDS-32 FUNCTIONALITY
16
The menu shows LED:ON or LED:OFF depending on the current state of the visual chirp.
Change the setting by navigating into the LED menu.
The menu shows the chirp divisor which is in currently use as R:/x, where x is 1, 2, 5, 10, 20
or 50. Change the divisor by navigating into the Ratio menu.
Use the right arrow key in the Main display to mute or unmute the audible chirp and key
sounds.
Use the chirp function to follow the number of pulses that the detector receives, for
example to help search for a radiation source. Adjust the divisor to a suitable level
depending on the number of pulses, so that the audible and visual signals can be
interpreted.