RDS-32 FUNCTIONALITY
33
A scaler measurement result remains on the meter display until the select key is pressed for
a new acquisition or the left arrow key is pressed to exit the mode. If the Net Meas. result is
less than background it will be empty. Each acquisition in the scaler mode is automatically
saved in RDS-32 memory.
Once a scaler measurement has been initiated it can be stopped at any time by pressing the
Select key or the left arrow key. In that menu the measurement can be restarted, stopped or
aborted. If the scaler measurement is stopped, the result of the measurement will be
displayed. If the scaler measurement is aborted, the display will move to the Scaler menu
without showing a result.
Example result of a Scaler
measurement with an external
alpha/beta probe showing
time T and the result alpha
and beta activity.
Example result of a Scaler
measurement with an external
alpha/ beta/ gamma pancake
probe showing the result activity
R in Bq, count time T and
counted pulses P.
To Next Page
Loading...
