12
Mitel Networks
5330 IP Phone
Specify Display Contrast
You can adjust the display contrast either via the phone volume controls (when
the phone is idle) or via the Settings application.
To adjust the display contrast using the volume controls:
Repeatedly press (UP) or (DOWN).
Note: You can use this method only when the phone is idle. If the phone is
ringing, this action adjusts the ring volume. If the phone is in use, this action
adjusts the handset, headset and speakerphone volume.
To adjust the display contrast using the Settings application:
1. Press Settings or .
2. Press Contrast.
3. Press the Contrast keys to adjust the contrast of your screen.
4. Press Save.
Note: Press Cancel at any time to exit this application without making any
changes.
Specify Audio Feedback Options
The error beep volume in the phone is related to the volume of the speaker.
You can set the beep volume using this procedure; however, adjusting the
speaker volume also affects the beep volume.
To adjust the volume of the audio feedback:
1. Press Settings or .
2. Press Audio Feedback.
3. Set the options using the appropriate actions described below:
Option Action
Turn audio feedback off for Press Turn Off.
errors
Adjust audio for error Press Volume + or Volume –
beeps
Turn audio feedback on for Press Play Error Tone
errors
4. Click Save.
Note: Press Cancel at any time to exit this application without making any
changes.
To Next Page
Loading...
Need help?
General
