Mitel IP 5330 - Call Restriction and Emergency Features; Do Not Disturb; Emergency Calls

29
Mitel Networks
5330 IP Phone
Do Not Disturb
When you enable Do Not Disturb, callers will get a busy tone, and an on-screen
text message indicating that you do not wish to be disturbed.
To activate or deactivate Do Not Disturb:
 Press the Do Not Disturb key that you programmed. The key is highlighted
when Do Not Disturb is activated and is not highlighted when Do Not
Disturb is not activated. The phone status line shows the Do Not Disturb
icon.
To activate Do Not Disturb from a remote extension:
1. Lift handset.
2. Dial the number of the station to which Do Not Disturb is to apply.
3. Dial the number of the station to which Do Not Disturb is to apply.
4. Hang up.
To deactivate Do Not Disturb from a remote station:
1. Lift handset.
2. Dial the appropriate feature access code.
3. Dial the number of the station with Do Not Disturb activated.
4. Hang up.
Emergency Calls
Warning for emergency number dialing: Consult your local authorities for
Emergency Numbers and 911 or equivalent service availability in your area.
There are two methods of dialing emergency numbers, based on the
programming of your 3300 ICP:
 Emergency Call Routing NOT programmed
 Emergency Call Routing programmed
Caution: Verify with your System Administrator which type of emergency
number dialing you can use.
EMERGENCY CALLS WHEN EMERGENCY CALL ROUTING NOT
PROGRAMMED
If Emergency Call Routing is NOT programmed, Emergency Number
dialing should only be performed by picking up the handset and selecting
the Analog Line key you have programmed. If Privacy Mode is enabled
and the Analog Line key local line is busy, dialing will not occur on the
Line Interface Module line. Emergency dialing using an IP connection may not
be supported due to ICP system configuration and country location. For more
information, contact your System Administrator.
To make an Emergency Call using the Line Interface Module line:
1. Lift the handset.
2. Press the Analog Line key that you have programmed.
The set indicates ANALOG CALL
3. Dial your Local Emergency Number.