Mitel IP 5330 - Messaging-Callback

32
Mitel Networks
5330 IP Phone
To turn Messaging - Advisory off:
1. Press Superkey (must be programmed to a key).
2. If necessary, press the No softkey until "Advisory Msgs?" appears. .
3. Press the Yes softkey when "Advisory appears.
4. Press the Turn Msg Off softkey .
Messaging - Callback
To leave a Callback Message when you hear busy or ringback tone:
 Press (MESSAGE) or press the Callback softkey.
To respond to a message waiting condition on your phone:
1. Press (MESSAGE).
2. If a password is required, dial your password (and press the Enter softkey
if available).
3. Press the Read Message softkey, and do one or all of the following:
 To display the time the message was sent, press the More Msg
softkey.
 To display the number of the caller, press the More Msg softkey twice.
 To call the message sender, press the Call softkey.
 To delete the message, press the Erase Msg softkey.
 To view the next message, press (MESSAGE).
You can check for messages from a remote station:
1. Press Superkey (must be programmed to a key).
2. Press the No softkey until "Remote Msging?" appears.
3. Press the Yes softkey.
4. Dial your extension number.
5. Press the Enter softkey.
6. If a password is required, enter your password and press the Enter
softkey.
7. Press the Yes softkey.
You can set, change, or clear a password (up to 7 digits, not including 0):
1. Press Superkey (must be programmed to a key).
2. Press the No softkey until "Set Password?" appears.
3. Press the Yes softkey.
4. Do one of the following:
 To enter a new password, enter your password.
 To change or clear your password, enter your current password.
5. Press the Enter softkey.
6. To change or clear your password, do one of the following:
 To change your password, enter your new password and press the
Enter softkey.
 To clear your password, enter 0.
7. Enter your new password again.
8. If you are setting up or changing a password, press the Enter softkey.
9. Press Superkey (must be programmed to a key).