Mitel IP 5330 - Specific Call Forwarding Types

24
Mitel Networks
5330 IP Phone
Call Forward - Remote (I'm Here)
To forward calls from a remote station to your current location:
1. Press SuperKey (must be programmed to a key).
2. Press the No softkey until "Call Forwarding?" appears.
3. Press the Yes softkey.
4. Press the Next softkey until "I Am Here" appears.
5. Press the Yes softkey.
6. Dial the extension of the remote station.
If you make an error while dialing, use the <— softkey to backspace and
correct the number.
7. Press (DOWN) or the Save softkey.
To cancel Call Forward – Remote from the station that set the remote
forwarding:
1. Lift the handset.
2. Dial the appropriate feature access code.
3. Dial the extension of the remote station.
4. Hang up.
To cancel Call Forward – Remote from the station that was forwarded:
1. Press SuperKey (must be programmed to a key).
2. Press the No softkey until "Call Forwarding?" appears.
3. Press the Yes softkey.
4. Press the Review softkey.
5. Press the Change softkey.
6. Press the TurnOff softkey.
7. Press SuperKey (must be programmed to a key).
Call Forward - End Chaining
To ensure that calls do not get forwarded again by the destination number:
1. Lift the handset.
2. Dial 64.
3. Hang up.
To again allow calls to be forwarded by the destination number:
1. Lift the handset.
2. Dial the appropriate feature access code.
3. Hang up.
Call Forward - Forced
To force an incoming call to be forwarded:
 Press the Forward softkey.