EasyManuals Logo

Mitel IP 5330 User Manual

Mitel IP 5330
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
7
Mitel Networks
5330 IP Phone
Protect Your Hearing
Your phone has a control for adjusting the volume of the handset receiver or
headset. Because continuous exposure to loud sounds can contribute to
hearing loss, keep the volume at a moderate level.
Adjust the Viewing Angle
The stand built into your phone tilts to give you a better view of the keys.
To tilt your telephone for better viewing:
1. Turn the phone so that the front faces away from you.
2. Hold the base unit firmly and press the release tabs on the sides of the
stand to detach the base unit.
3. Hinge the hooks of the base unit into the notches on the back of the phone
and snap into place as follows:
a. For a high-angle mount, hinge the two lower hooks into the bottom set
of notches and snap the two upper hooks into the middle set of
notches.
b. For a low-angle mount, hinge the two lower hooks into the middle set
of notches and snap the two upper hooks into the top set of notches.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mitel IP 5330 and is the answer not in the manual?

Mitel IP 5330 Specifications

General IconGeneral
ProtocolsMiNet and SIP
Headset PortDedicated headset port
Fixed Function KeysHold, Transfer, Conference, Volume, Mute
AudioFull-duplex speakerphone
Network Ports2 x 10/100 Mbps Ethernet ports
PowerPower over Ethernet (PoE)
Weight2.2 lbs
Dimensions8.5 x 7.5 x 6.5 inches (216 x 191 x 165 mm)

Related product manuals