Mitel IP 5330 - Make Busy; Message Waiting Indicator; Messaging-Advisory

31
Mitel Networks
5330 IP Phone
To answer a call (when Auto Answer is disabled):
 Press the flashing line key.
To answer call (when Call Notification is enabled)
 Select Close and then select the prime line.
To hang up:
 Press (CANCEL).
To mute your headset microphone:
 Press the (MUTE) key. The light turns ON.
To turn mute off and return to the conversation:
 Press the (MUTE) key. The light turns OFF.
Make Busy
You can use the Make Busy feature to have your phone appear busy to other
callers. If callers dial your phone number when Make Busy is enabled a
message indicating that your line is busy is displayed on their phones.
To enable Make Busy:
 Press the key you programmed to Make Busy. The key illuminates when
Make Busy is activated and MAKE BUSY is displayed.
To disable Make Busy:
 Press the key you programmed to Make Busy.
Message Waiting Indicator
The Message Waiting Indicator (MWI) feature allows you to be notified when
messages have been left on another phone. Once you have programmed a key
to MWI, this key is always enabled.
To use MWI to contact the extension that left a message:
 Press the key you have programmed to MWI.
Messaging - Advisory
Advisory Messaging enables you to select a notice that appears on your phone
display to inform people visiting your desk of your whereabouts. Select from a
variety of advisory messages, including "On vacation", "In a meeting", or "Out to
Lunch".
To turn Messaging - Advisory on:
1. Press Superkey (must be programmed to a key).
2. If necessary, press the No softkey until "Advisory appears.
3. Press the Advisory softkey when "Advisory Msgs?" appears.
4. Press the Next softkey until the desired message appears.
5. Press the Turn Msg On softkey.