26
Mitel Networks
5330 IP Phone
Call Pickup
To answer a call that is ringing at another extension in your Pickup Group:
1. Lift the handset.
2. Press the key that you programmed as Pickup.
To answer a call that is ringing at another extension not in your Pickup Group:
1. Lift the handset.
2. Dial the appropriate feature access code.
3. Dial the number of the ringing station.
Campon
When you get a busy tone, you can use the Campon feature to be notified when
the busy party becomes available.
To Campon to a busy station:
Press the I Will Wait softkey.
To retrieve a call when you hear the Campon tone:
You can use the Trade Call or Call Swap feature with the (TRANS/
CONF) hardkey or a programmable line key.
Direct Paging
Direct Paging allows you to page a party through the party’s handsfree speaker.
If the paged party has Off-Hook Voice Announce enabled, the page will be
heard even when the party is on a handset or headset call. If the paged party
has Handsfree Answerback enabled and turned on on the phone, your page
automatically establishes a handsfree call with the paged party.
To page a party:
1. Lift the handset.
2. Press the Direct Paging feature key or dial the appropriate feature access
code.
3. Dial the extension number.
4. Speak to the dialed party after the tone.
To Next Page
Loading...
Need help?
General
