EasyManua.ls Logo

Mitel IP 5330 - Page 27

Mitel IP 5330
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
27
Mitel Networks
5330 IP Phone
How you answer a Direct Page depends on whether Handsfree Answerback is
enabled and turned on at your phone. See one of the following procedures in
this guide:
 Direct Paging - Handsfree Answerback Enabled
 Direct Paging - Handsfree Answerback Disabled
Direct Paging - Handsfree Answerback Enabled
When you receive a Direct Page, Handsfree Answerback automatically
establishes a Handsfree call on your phone after a single burst of tone.
Your administrator enables or disables Handsfree Answerback on your phone.
After your administrator enables Handsfree Answerback, you can choose to
turn it on or off directly from your phone.
To turn Handsfree Answerback on:
 When your phone is idle, press (MUTE) once. The MUTE key light
flashes to indicate that Handsfree Answerback is ON.
 When a Direct Page arrives, the MUTE key light turns OFF and a
Handsfree call is automatically established.
To turn Handsfree Answerback off:
 Press the flashing (MUTE) key once. The MUTE key light turns OFF.
 To respond to a Direct Page when Handsfree Answerback is OFF, see
"Direct Page—Handsfree Answerback Disabled" elsewhere in this guide.
Note: By default, Handsfree Answerback is turned OFF at your phone. If the
(MUTE) key is OFF when your set is idle, Handsfree Answerback is OFF.
To answer a call using Handsfree Answerback:
Phone state before Page arrives To answer the Direct Page
Phone is idle and MUTE 1. Check that MUTE is OFF.
is flashing 2. Listen for the paging party.
3. Begin speaking.
4. Lift the handset if you wish to switch
from a Handsfree call to a handset call.
You are on a handset or headset 1. Check that MUTE is flashing.
call, and MUTE is OFF 2. Press MUTE. The light turns ON
solid, and you are now speaking to the
paging party and have muted your
handset/headset call.
3. Speak to the paging party. Press
MUTE to alternate between handset/
headset and handsfree calls.
You are on a MUTED The party paging you receives a busy
handset/headset call, OR, you are tone. Handsfree Answerback does not
on a Handsfree call interrupt your call.

Table of Contents

Related product manuals