Mitel IP 5330 - Making and Answering Calls; Phone Book Usage; Answer a Call

17
Mitel Networks
5330 IP Phone
Clear Programming from a Key
You may wish to clear the programming from a key if you are no longer using it.
To clear the feature or application programming from a key:
1. Press Settings or .
2. Press Programmable Keys.
3. Press the key you wish to clear.
4. Press Clear Key.
Either press Cancel or reprogram the key.
MAKING AND ANSWERING CALLS
You can make a call using one of the following methods:
 Press the programmed key associated with the party you want to call. For
more information about programming keys, see Programming Features On
Your Keys.
 Dial the number using the dialpad.
 Use Phone Book (see Phone Book below).
Phone Book
To use Phone Book:
1. Press Phone Book (if available) or the key programmed as Phone Book.
2. Enter the name of the desired party, as follows:
 For each letter in the name, press the appropriate key on the keypad
until the letter is shown in the display. For example, if the letter C is
required, press the digit 2 three times.
 Use the <— softkey to correct errors.
 If the next letter in the name is on the same digit key as the previous
letter, press the —> softkey before proceeding.
 If required, press —> softkey to add a space between the first and last
name.
3. Press the Lookup softkey.
4. If no match exists, edit the original entry.
5. If more than one match is found, press the Next softkey.
6. Do one of the following:
 To make the call, press the Call softkey.
 To edit the entry, press the Backup softkey.
 To exit, press Cancel or Superkey.
Answer a call
Do one of the following:
 Select the programmable line key for the ringing line that is flashing.
 Lift the handset or press (SPEAKER).