Mitel IP 5330 - Mute Functionality; Transferring Calls; Conference Calls

20
Mitel Networks
5330 IP Phone
Mute
Mute lets you temporarily turn your phone's handset, headset or handsfree
microphone off during a call.
To turn Mute on during a call:
 Press (MUTE). The (MUTE) light turns ON.
To turn Mute off and return to the conversation:
 Press (MUTE). The (MUTE) light turns OFF.
Note: If you are on a Handsfree MUTED call and you lift the handset, the
handset microphone is automatically enabled and the MUTE light turns OFF.
NOTE FOR USERS ON RESILIENT 3300 ICP SYSTEMS: If your phone
switches to the secondary system while your speaker or handset is muted (that
is, while the Mute key is lit) the call remains muted until you hang up.
Transfer
To Transfer an active call:
1. Press (TRANS/CONF).
2. Dial the number of the third party.
3. Do one of the following:
 To complete the Transfer, hang up.
 To announce the Transfer, wait for an answer, consult, and hang up.
 To cancel the Transfer, press (CANCEL).
To transfer an active call during headset operation:
1. Press (TRANS/CONF).
2. Dial the number of the third party.
3. To complete the Transfer, press the Release feature key.
Conference
To form a Conference when a two–party call is already in place, or to add
another party to an existing Conference:
1. Press (TRANS/CONF).
2. Dial the number of the next party.
3. Wait for an answer.
4. Press (TRANS/CONF).
To leave a Conference:
 Hang up or press (CANCEL).
Conference Split
To Split a Conference and speak privately with the original party:
 Press the Split softkey.