15
During a call
Using the mute function
A call has been set up with a correspondent and you wish to have a confidential conversa-
tion without the correspondent hearing you:
Deactivate the microphone:
Press Mute.
-> The handset microphone is deactivated; the indicator light
associated with the key blinks. Your correspondent does not
hear you.
Reactivating the microphone:
Press Mute again.
-> The handset microphone is in service; the indicator light
associated with the key goes off indicating that your
correspondent hears you again.
Putting a correspondent on hold
A call has been set up with a correspondent and you want to put it on hold to resume it later
on the same terminal:
1 - Press Hold.
-> Your correspondent is put on hold and hears beeps or music-
on-hold.
2 - Press Hold again to resume your conversation with the
correspondent.
Putting a party on hold and resuming the call on another
terminal
You are communicating with a correspondent and you wish to continue the conversation
on another terminal.
Press the context-sensitive More key in the lower panel of the
menus.
Press the context-sensitive Parking key.
-> The terminal returns to idle mode with the "Parked call"
status. Your correspondent is put on hold and hears beeps or
music-on-hold.
To Next Page
Loading...
