Terminal settings
59
Setting the display
Go to the Display menu.
Welcome screen:
-> Select any of the modes displayed (using the arrows).
-> Enter the timeout before changeover to display in power-
saving mode (use the context-sensitive keypad).
Brightness:
-> Adjust the brightness using the horizontal browser keys.
-> Enter in seconds the screen backlight timeout (use the
context-sensitive keypad).
Setting the keypad
Go to the Dial menu.
1 - Select an Interactive keypad sub-menu.
This option is used to correct the phone number being entered:
• Deactivate: for correcting the number being entered using the
key. You have to press Dial to start the call.
• Activated: does not allow the number to be corrected. The call
is automatically started at the end of the input.
Speed dial keys
This option is used to save a phone number on a digital key on
the keypad (see “Speed dial”, page 25) or on a programmable
key. However, since the programmed keys are not visible from
MiVoice 5000 User Portal in this way, there may be a clash
between these two programming types.
On the other hand, these keys are programmed on the terminal
and their programming is lost if the subscription is moved (login/
logout). They are not accessible from an associated terminal.
To Next Page
