51
Login / Logout function
*
At the moment, you are occupying an office equipped with a general-purpose terminal (not
assigned to a subscriber). You can take your calls, programmed forwards as well as the
language associated with your subscriber number from there.
When you get back to your office, you will use the same procedure to retrieve your calls on
your own terminal, as well as its configuration (forwards, programmable keys, terminal set-
tings, etc.).
If, however, you no longer want your subscription to be associated with the temporary ter-
minal when you leave your office, you can release your terminal by carrying out a logout
procedure on this terminal. The temporary user terminal again becomes a general-purpose
terminal, though calls can be made on it. You can later retrieve your subscriber number
and the associated rights on your own terminal by logging on again.
Restoring your subscriber rights on a general-purpose
terminal
The terminal status is indicated by the message "No subscriber", displayed on the screen.
The system key Ident is displayed.
1 - Press the Ident system key.
2 - Enter your subscriber number then press OK to confirm.
3 - Enter your password.
-> To define a password, see Section “Changing the
subscription password”, page 55.
4 - Press OK to confirm.
Releasing a terminal*
1 - Press the system Menu key.
2 - Swipe the touchscreen and select Logout.
3 - Press the context-sensitive Select key to confirm.
4 - Your request is taken into account.
Remarque : We advise you to program a forward on busy (to
voicemail, for example) to ensure that your calls are taken into
account.
However, some system configurations allow automatic forward-
ing to voicemail; seek advice from your system manager.
* Selon programmation effectuée par l’exploitant système
To Next Page
