During a call
17
On the second, idle terminal (Mitel 6000 SIP Phone):
1 - Press the context-sensitive Menu key.
2 - Press the key to display Retrieve parking then press
Select to confirm.
3 - Dial the number of the terminal on which you have executed
the Parking function then click OK to confirm.
-> Communication with your correspondent has been restored.
Remarque : If an external parked call is not resumed within a giv-
en time, it is routed to the operator. An internal call is released.
Via feature code:
Recovering a parked call: # 7 0 + extension number
On the same terminal:
If you change your mind and wish to recover the call on the
terminal where it has been parked:
1 - Press the context-sensitive Menu key.
Press the key to display Retrieve parking then press Select
to confirm.
-> Communication with your correspondent has been restored.
Via feature code:
Recover the parked call: # 7 0 + extension number
Switching a call between two terminals of the same association
*
Your subscription has several associated terminals: one fixed terminal and one DECT ter-
minal, for instance. In this example, you wish to resume on the DECT terminal a call al-
ready set up on the fixed terminal.
1 - From the associated terminal on which you wish to resume
the call (the DECT terminal in our example); enter the code #
7 0.
-> An acknowledgement message is transmitted.
2 - On the first terminal, release the call by on-hooking or by
pressing the End key.
-> The call is now set up on the second terminal.
* Selon programmation effectuée par l’exploitant système
To Next Page
