During a call
20
Making a transfer during an enquiry call
You are engaged in an enquiry call (with one correspondent on line and another on hold).
You wish to link up your two correspondents then hang up.
1 - Press the context-sensitive Transfer key.
2 - Press the key of the blinking line then press Transfer. This is
the correspondent who has been on hold.
-> The call has been transferred.
Answering a second call
You are on line with a correspondent and receive a second call (a new line key flashes).
• Press the flashing line key to take the second call (the first
correspondent is put on hold).
You can switch from one call to the other or set up a three-way
conference.
Setting up a conference call
You are engaged in a call with a correspondent and you wish to set up a three-way con-
ference with another correspondent.
1 - Press the context-sensitive Conf. key.
-> The other party is put on hold.
2 - Dial the number of the other party.
3 - Press Dial.
4 - When the second correspondent is on line, press Conf. again
to confirm (the first correspondent is kept on hold until the
conference is validated).
-> The numbers of your two correspondents are displayed on
screen. You are holding a conference call.
If you cannot reach the second correspondent, press the blinking
line key to resume the call with the correspondent on hold.
To Next Page
