Mitsubishi Electric MELSEC-A/QnA Series - Page 183

4 TEMPERATURE INPUT MODULE REPLACEMENT
4 - 40
Q64RD-G
Address
(decimal)
Name Read/write
48 Warning output flag
R
49 Disconnection detection flag
50 to 53 CH1 to CH4 Scaling value
54 CH1 Measured temperature value (L)
(32bit) (H)
55
to
60 CH4 Measured temperature value (L)
R
61 (32bit) (H)
62 CH1 Scaling range lower limit value (L)
(H)
R/W
63
64 CH1 Scaling range upper limit (L)
value (H)
65
to
76 CH4 Scaling range upper limit (L)
value (H)
R/W
77
78 CH1 Scaling width lower limit value
79 CH1 Scaling width upper limit value
to
85 CH4 Scaling width upper limit value
R/W
86 CH1 Warning output lower (L)
87 lower limit value (H)
88 CH1 Warning output lower (L)
89 upper limit value (H)
90 CH1 Warning output upper (L)
91 lower limit value (H)
92 CH1 Warning output upper (L)
93 upper limit value (H)
to
116 CH4 Warning output upper (L)
R/W
117 upper limit value (H)
118 CH1 Offset temperature setting (L)
119 value (H)
120 CH1 Gain temperature setting (L)
value (H)
121
to
132 CH4 Gain temperature setting (L)
value (H) R/W
133
134 Extended averaging processing selection
135 to
147
System area (Not used) -
148
Conversion setting for disconnection
detection
R/W
149 System area (Not used) -