Mitsubishi Electric MELSEC-A/QnA Series - Page 288

7 POSITIONING MODULE REPLACEMENT
7 - 51
*1 A value of the same specification as AD70 is stored. The buffer memory address name of the QD73A1 changes Deviation
counter value (pulse). Deviation counter value (pulse) supports the QD73A1 whose serial number (first five digits) is
"15042" or later.
*2 When electronic gear setting is 1/1, the value will be the same as Deviation counter value (pulse).
Zero/gain adjustment
area
Zero/gain adjustment specification
-- 94
Zero/gain adjustment value specification
-- 95
Factory default zero/gain adjustment value
restoration request
-- 96
Monitor area
Current feed value
100
101
100
101
Actual current value
102
103
102
103
Error code (ERR.1)
104 104
Error code (ERR.2)
105 105
Deviation counter value
106
107
116
*1
117
*1
Deviation counter value (address) --
106
*2
107
*2
Movement amount after near-point dog ON
108
109
108
109
Speed-position switching command
110 110
Control mode
111 111
Zero/gain execution status
-- 112
Zero/gain adjustment status
-- 113
Feedrate
--
114
115
Error history
(Record 0) Error code
-- 120
(Record 0) Error occurrence (Year : Month)
-- 121
(Record 0) Error occurrence (Day : Hour)
-- 122
(Record 0) Error occurrence (Minute : Second)
-- 123
(Record 1 to 15)
-- 124 to 183
Error history pointer
-- 184
Item
Buffer memory address
AD70 QD73A1