Mitsubishi Electric MELSEC-Q Series - Names of each Part

4 - 3
Chapter 4 Installation, Wiring and Maintenance of the Product
4.1.2 Names of each part
The part names of the Simple Motion module are shown below.
QD77GF16
1)
2)
3)
5)
4)
QD77GF8
1)
2)
3)
5)
4)
QD77GF4
1)
2)
3)
5)
4)
No. Name Description
1) LED (upper part on the front) Refer to this section (1).
2) LED (CC-Link IE Field connector section) Refer to this section (2).
3) External input connection connector
Connector to connect the mechanical system input, manual
pulse generator/incremental synchronous encoder, or forced
stop input. (26-pin connector)
Refer to Section 3.4.2 for details.
4) CC-Link IE Field Network cable connector Connector to connect the servo amplifier.
5) Serial number plate Shows the serial number printed on the rating plate.