Appendix - 17
Appendices
Appendix 3 Connection with external device
Appendix 3.1 Connector
Mounted onto an external input connection connector of the Simple Motion module
and used for wiring an external device. The "external device connector" includes the
following 3 types.
(1) Connector type
Type
Type
Connector Connector case
Soldering type
(LD77MHIOCON)
Quick release metal latch
type
10126-3000PE 10326-52F0-008
Soldering type
(Note)
Threaded type 10126-3000PE 10326-52A0-008
Pressure-displacement type
(Note)
Quick release metal latch
type
10126-6000EL 10326-3210-000
(Note): These connectors are not options. Please purchase them by customer.
(2) Specifications of the connector
Part name Specification
Applicable connector
Soldering type
(Quick release metal latch type/
Threaded type)
Pressure-displacement type
(Quick release metal latch type)
Applicable wire size
AWG30 to AWG24 (0.05 to 0.2mm
2
) AWG28 (Stranded, 0.08mm
2
)
(Note): The external input wiring connector has been prepared. Please purchase them by customer.
Specialized tool
• MDR assembly press for pressure-displacement type
Model name: 10960 (Hand press)
: 10962 (Fixture unit)
: 10963 (Fixture block)
: 10964-1 (Cable clamp (black) 14 - 50 position)
• Contact for the specialized tool:
Sumitomo 3M http://www.3m.com
To Next Page
Loading...
