A - 23
COMPLIANCE WITH THE EMC AND LOW VOLTAGE DIRECTIVES
(1) For programmable controller system
To ensure that Mitsubishi programmable controllers maintain EMC and Low
Voltage Directives when incorporated into other machinery or equipment, certain
measures may be necessary. Please refer to one of the following manuals.
• QCPU User's Manual (Hardware Design, Maintenance and Inspection)
• Safety Guidelines
(This manual is included with the CPU module or base unit.)
The CE mark on the side of the programmable controller indicates compliance
with EMC and Low Voltage Directives.
(2) For the product
To make this product comply with EMC and Low Voltage Directives, refer to
Section 4.3.1 "Precautions for wiring".
RELEVANT MANUALS
(1) Simple Motion module
Manual Name
<Manual number (model code)>
Description
MELSEC-Q QD77GF Simple Motion Module User's Manual
(Positioning Control)
<IB-0300202, 1XB956>
Specifications of the QD77GF and information on how to
establish a system, maintenance and inspection, and
troubleshooting
Functions, programming and buffer memory for the
positioning control of the QD77GF
MELSEC-Q/L QD77MS/QD77GF/LD77MS/LD77MH Simple
Motion Module User's Manual
(Synchronous Control)
<IB-0300174, 1XB943>
Functions, programming and buffer memory for the
synchronous control of the Simple Motion module
MELSEC-Q QD77GF Simple Motion Module User's Manual
(Network)
<IB-0300203, 1XB957>
Overview of CC-Link IE Field Network, and specifications,
procedures before operation, system configuration,
installation, wiring, settings, functions, programming, and
troubleshooting of the MELSEC-Q series Simple Motion
module
To Next Page
Loading...
