A - 26
TERMS
Unless otherwise specified, this manual uses the following terms.
Term Description
PLC CPU The abbreviation for the MELSEC-Q series PLC CPU module
QCPU The abbreviation term for the MELSEC-Q series PLC CPU module
Simple Motion module The abbreviation for the QD77GF CC-Link IE Field Network Simple Motion module
MR-J4-B MR-J4-_B_-RJ010+MR-J3-T10 servo amplifier series
MR-J4-GF MR-J4-_GF_(-RJ) Servo amplifier series
Programming tool A generic term for GX Works2 and MR Configurator2
GX Works2
The product name of the software package for the MELSEC programmable controllers
(Version 1.98C or later)
MR Configurator2 The product name of the setup software for the servo amplifier (Version 1.19V or later)
Intelligent function module
A MELSEC-Q/L series module that has functions other than input or output, such as A/D
converter module and D/A converter module
Servo amplifier (drive unit)
A generic term for a drive unit
Unless specified in particular, indicates the motor driver unit of the sequential command
method which is controlled by the Simple Motion module (belonging to own station).
Axis Another term for a servo amplifier
HPR A generic term for "Home position return"
HP A generic term for "Home position"
CC-Link IE Field Network A high-speed and large-capacity open field network that is based on Ethernet (1000BASE-T)
Slave station A generic term for remote I/O station, remote device station, and intelligent device station
Communication mode
correspond to CiA402
Communication mode that corresponds to open network standard CiA402
To Next Page
Loading...
