Mitsubishi Electric MELSEC-Q Series - Applicable System

2 - 5
Chapter 2 System Configuration
2.3 Applicable system
(1) Number of applicable modules
Pay attention to the power supply capacity before mounting modules because
power supply capacity may be insufficient depending on the combination with
other modules or the number of mounted modules.
If the power supply capacity is insufficient, change the combination of the
modules.
(a) When mounted with a CPU module
Applicable CPU module Number of modules
(Note-1)
CPU type CPU model
PLC CPU
Universal model QCPU
Q00UJCPU
Up to 2 modules
Q00UCPU
Q01UCPU
Q02UCPU Up to 4 modules
Q03UDCPU
Up to 8 modules
Q04UDHCPU
Q06UDHCPU
Q10UDHCPU
Q13UDHCPU
Q20UDHCPU
Q26UDHCPU
Q03UDECPU
Q04UDEHCPU
Q06UDEHCPU
Q10UDEHCPU
Q13UDEHCPU
Q20UDEHCPU
Q26UDEHCPU
Q50UDEHCPU
Q100UDEHCPU
Universal model QnUDV
(High speed type CPU)
Q03UDVCPU
Q04UDVCPU
Q06UDVCPU
Q13UDVCPU
Q26UDVCPU
(Note-1): The total mounted number of the QD77GF and the QJ71GF11-T2 set by GX Works2.
To mount the QJ71GF11-T2 more than the maximum applicable number, set by the
dedicated instruction CCPASET. The QD77GF does not support the dedicated
instruction CCPASET.
Examples for mounting the QD77GF and the QJ71GF11-T2 with the Q03UD(E)CPU
are shown in the table below.
Applicability
Number of modules
QD77GF QJ71GF11-T2
Total
GX Works2 GX Works2 Dedicated instruction
4 4 0 8
4 5 0 9
4 4 1 9
: Applicable, : N/A