16 - 37
Chapter 16 Troubleshooting
Related buffer memory address
Set range
(Setting with sequence program)
Remedy
42+150n
43+150n
1 to 8388608
With the setting brought into the setting range, turn the PLC
READY signal [Y0] from OFF to ON.
44+150n
45+150n
1 to 8388608
46+150n
47+150n
1 to 8388608
48+150n
49+150n
<JOG speed limit value>
1 to 1000000000 [PLS/s]
1 to 2000000000 [
10
-2
mm/min or others]
• With the setting brought into the setting range, turn the PLC
READY signal [Y0] from OFF to ON.
• Bring the setting into the speed limit value or below.
50+150n 0, 1, 2, 3
With the setting brought into the setting range, turn the PLC
READY signal [Y0] from OFF to ON.
51+150n 0, 1, 2, 3
52+150n 0, 1
53+150n 1 to 100
54+150n
55+150n
1 to 8388608
56+150n 0, 1
57+150n 0, 1
58+150n 0, 1
60+150n
61+150n
0 to 100000
62+150n 0, 1, 2, 3, 4
n: Axis No.-1
To Next Page
Loading...
