Mitsubishi Electric NZ2EX2B-60AD4 - Page 162

160
D2002 Main A/D converter module CH1 Digital operation value
Device for storage
D2003 Main A/D converter module CH2 Digital operation value
D2004 Main A/D converter module CH3 Digital operation value
D2010 to D2015 Main A/D converter module CH1 Maximum value to CH3 Minimum value
D2020 Main A/D converter module Latest error code
D2021 Main A/D converter module Latest warning code
D2022 Main A/D converter module Input signal error detection flag
D2023 Main A/D converter module Alert output flag
D2032 Extension A/D converter module CH1 Digital operation value
D2033 Extension A/D converter module CH2 Digital operation value
D2034 Extension A/D converter module CH3 Digital operation value
D2035 Extension A/D converter module CH4 Digital operation value
D2040 to D2047 Extension A/D converter module CH1 Maximum value to CH4 Minimum value
D2052 Extension A/D converter module Input signal error detection flag
D2053 Extension A/D converter module Alert output flag
F0 Main A/D converter module CH2 upper limit alert issued
F1 Main A/D converter module CH2 lower limit alert issued
F2 Main A/D converter module CH1 disconnection occurred
F3 Main A/D converter module CH3 disconnection occurred
F4 Main A/D converter module Maximum value/minimum value read completed with an error
F10 Extension A/D converter module CH2 upper limit alert issued
F11 Extension A/D converter module CH2 lower limit alert issued
F12 Extension A/D converter module CH1 disconnection occurred
F13 Extension A/D converter module Maximum value/minimum value read completed with an error
M0 Communication ready flag (station number 1)
M300 Main A/D converter module Maximum value/minimum value read flag
M310 Main A/D converter module REMFR instruction completed flag
M311 Main A/D converter module REMFR instruction completed-with-error flag
M320 Extension A/D converter module Maximum value/minimum value read flag
M330 Extension A/D converter module REMFR instruction completed flag
M331 Extension A/D converter module REMFR instruction completed-with-error flag
SM400 Always ON
SB47 Baton pass status of own station
SB49 Data link status of own station (master station)
SW0A.0 Baton pass status of each station (station number 1)
SW0B0.0 Data link status of each station (station number 1)
N0 Nesting (station number 1)
Device Description