Mitsubishi Electric RP-1ADH-S15 Series - Page 57

3 Controller
Emergency stop input and output etc.
3-48
Fig.3-10 ： Connection of the special-stop-input
SKIP
1A
2A
3A
4A
1B
2B
3B
4B
専用停止入力コネクタ（SKIP）
電線差込口（AWG#24-18）
マイナスドライバ差込口
<The connector connection method>
The electric wire skins covering 7mm.
In the condition that the minus driver is inserted, insert the electric wire, and remove the
minus driver.
The electric wire is locked by the connector.
Special stop connector
Minus driver plug area
Electric wire plug area(AWG#24-18)
*The connector of machine cable connection
has some from which form differs.