2-23
Shipping special specifications, options, and maintenance parts
2 Robot arm
(1) Machine cable extension
■ Order type: ● Fixed type (10m) ........... 1A-10CBL-1
● Fixed type (15m) ........... 1A-15CBL-1
● Flexed type (5m) ........... 1A-05LCBL-1
● Flexed type (10m)......... 1A-10LCBL-1
● Flexed type (15m)......... 1A-15LCBL-1
■ Outline
This cable is exchanged with the standard machine cable (5m) accessory to extend
the distance between the controller and connector box enclosed with the robot arm.
A fixed type and flexible type are available.
Exchanges after shipment will be charged (for packaging, shipping costs).
The fixing and flexible types are both configured of the motor signal cable and motor
power cable.
[Note] The cable length between robot arm and connector box doesn't change.
■ Configuration
Table 2-5 : Configuration equipment and types
■ Specifications
The specifications for the fixed type cables are the same as those for standard cables.
Table 2-6 : Conditions for the flexed type cables
[Caution] The warranty life may greatly differ according to the usage state (items related to Table 2-6 and to the
amount of silicon grease applied in the cable conduit.
Part name
Type
Note1)
Note1) The numbers in the boxes □□ refer the length.
Qty.
Mass (kg)
Note2)
Note2) Mass indicates one set.
Remarks
Fixed Flexed
Fixed Set of signal and power cables 1A- □□ CBL-1 1 set - 7.0 (10m)
10.0 (15m)
10m, or 15m each
Motor signal cable (for fixed type) 1E- □□ CBL(S)-N 1 cable -
Motor power cable (for fixed type) 1A- □□ CBL(P)-1 1 cable -
Flexed Set of signal and power cables 1A- □□ LCBL-1 1 se - 5.7 (5m)
10.1 (10m)
14.2 (15m)
5m, 10m, or 15m each
Motor signal cable (for flexed type) 1E- □□ LCBL(S)-N - 1 cable
Motor power cable (for flexed type) 1A- □□ LCBL(P)-1 - 1 cable
Nylon clamp NK-18N - 2 pcs. -
NK-14N - 2 pcs. -
Silicon rubber - 4 pcs. -
Item Specifications
Minimum flexed radius 100R or more
Cable bare, etc., occupation rate 50% or less
Maximum movement speed 2000mm/s or less
Warranty life (no.) 7.5 million times
Environmental proof Oil-proof specification sheath
(for silicon grease, cable sliding lubricant type)
Cable configuration Motor power cable φ6.5 x 10
Motor signal cable φ7 x 6 and φ1.7 x 1