２ Robot arm
Shipping special specifications, options, and maintenance parts
2-24
■ Cable configuration
The configuration of the flexed cable is shown in Table 2-7. Refer to this table when selecting the cable bare.
Table 2-7 ： Cable configuration
Note) The square in the cable name indicates the cable length.
Item
Motor signal cable
1E- □□ LCBL(S)-N
Motor power cable
1A- □□ LCBL(P)-1
No.of cores AWG#24 (0.2mm
2
) -4P AWG#18 (0.75mm
2
) AWG#18 (0.75mm
2
) -3C
Finish dimensions Approx. φ7mm Approx. φ1.7mm Approx. φ6.5mm
No.of cables used 6 cables 1 cable 10 cables
To Next Page
Loading...
