4G1 ENGINE (E-W) -
Specifications
11A-1-5
PWEE9520
E
Nov. 1995Mitsubishi Motors Corporation
Item Nm
Thermo valve 27
Water temperature gauge unit 11
Water temperature sensor 29
Water pump 13
Exhaust manifold and intake manifold
Boost sensor 5
Solenoid valve assembly 9
Intake manifold 17
Intake manifold stay (MPI)
M8 17
M10 21
Intake manifold stay (carburetor) 29
Exhaust manifold cover 29
Exhaust manifold
M8 17
M10 29
Oxygen sensor 44
Rocker arms, rocker shafts, and camshaft
Fuel pump cover 12
Rocker cover 4
Rocker shaft assembly 31
Adjusting screw 15
Bearing cap
24
11
Cylinder head and valves
Cylinder head bolt 20 + 90
_
+90
_
Tighten to 49 Nm, then completely loosen and retighten as described.
Oil pump and oil pan
Transmission stay 23
Oil pan 7
Drain plug 39
Oil screen 18
Front case 13
Relief plug 44
Oil pump cover 10
Pistons and connecting rods
Connecting rod nut 17 + 90
_
to 100
_
PWEE9520-A
E
Dec. 1998Mitsubishi Motors Corporation Revised
To Next Page
Loading...
Need help?
General
