4G1 ENGINE (E-W) -
Special Tools
11A-2-2
PWEE9520
E
Nov. 1995Mitsubishi Motors Corporation
Tool UseNameNumber
MD998760 Valve stem seal
installer
Installation of valve stem seals
(SOHC 12-VALVE)
MD998780 Piston pin setting
tool
Removal and press-fitting of piston pins
MB991659 Guide-D Guide for removal and press-fitting of piston
pins
MD998772 Valve spring com-
pressor
Compression of valve springs
MD998440 Leak-down tester Testing of automatic lash adjusters
(DOHC)
MD998442 Air bleed wire Testing of automatic lash adjusters
(DOHC)
MD998781 Flywheel stopper Locking flywheel in fixed position
MB991671 Valve stem
installer
Press-fitting of valve stem seals
(SOHC 16-VALVE, DOHC)
MB991653 Cylinder head bolt
wrench (10)
Removal and installation of cylinder head bolt
PWEE9520-A
E
Dec. 1998Mitsubishi Motors Corporation Revised
To Next Page
Loading...
Need help?
General
