Mitsubishi 4G9 - BA Intake Manifold Stay Installation; Installation Service Points: AA Throttle Body Gasket

4G9 ENGINE (E-W) -
Throttle Body and EGR System (GDI)
11A-5a-5
INSTALLATION SERVICE POINTS
"
A
A
THROTTLE BODY GASKET
"
B
A
INTAKE MANIFOLD STAY INSTALLATION
(1) Tighten the four bolts at the top and bottom of the stay
handtight.
(2) Check that the stay seating surface is in close contact
with the bosses on the intake manifold and the cylinder
block.
(3) Tighten the four bolts to the specified torque.
PWEE9502-H
E
July 2000Mitsubishi Motors Corporation Added
<Up to 2000 model for
CARISMA,1999 model
for SPACE STAR,
SPACE RUNNER>
Tab
<From 2001 model for CARISMA,
From 2001 model for SPACE STAR,
GALANT>
<PAJERO io>
Intake manifold
Cylinder block
Intake
manifold
stay
Bolt
Bolt
<Up to 2000 model>
<From 2001 model>
Intake manifold
Cylinder
block
Intake manifold
stay
Bolt
Bolt