To Next Page

To Previous Page

2 - 2 2 - 2

MELSEC-Q

2 SYSTEM CONFIGURATION

(4) Compatibility with online module change

To make an online module change, use the A/D converter module of function

version C or later.

POINT

The A/D converter module does not have the products of function versions A and B.

The products of function version C include the functions of the products of function

versions A and B.

(5) Q64AD-GH compatible software packages

The following table indicates the compatibility of the systems using the Q64AD-

GH with the software packages.

GX Developer is required when the Q64AD-GH is used.

Software Version

GX Developer

GX Configurator-AD

Single PLC system Version 7 or later

Q00J/Q00/Q01CPU

Multiple PLC system Version 8 or later

Single PLC system Version 4 or later

Q02/Q02H/Q06H/

Q12H/Q25HCPU

Multiple PLC system Version 6 or later

Single PLC system

Q12PH/Q25PHCPU

Multiple PLC system

Version 7.10L or later

If installed in a MELSECNET/H remote I/O

station

Version 6 or later

Version 1.14Q or later

4 When using the pass data, use the product of Version 1.16S or later.

(6) Q62AD-DGH compatible software packages

The following table indicates the compatibility of the systems using the Q62AD-

DGH with the software packages.

GX Developer is required when the Q62AD-DGH is used.