Mitsubishi MELSEC-A series - Page 57

3. SPECIFICATIONS /MELSEC-A
0 Processing will stop if one axis proceeds ahead of the
other and dual axis processing is called. See Fig. 3.36.
X axis
302
301 1-1 )- 2nd point
21 1
"00" Dwell
X axis
-1
L L 2nd point- 3- 3rd point
Y axis
Y axis switches to 2nd point but
X axis has reached start point 3.
Positioning stops.
"1 : Dual axis start has been specified for the X axis so that
start point data number 2 is used for both X and Y axes.
"2: Y axis start command is received so that processing
commences from start point.
Fig. 3.36 Start Data Example 6
cI.-rL
IB INAI 66101-A