401
EFCALL, EFCALLP
1
2
3
4
4
6
7
8
7.6 Structure creation instructions
7.6.7 EFCALL, EFCALLP
(3) If the EFCALL(P) instruction is used in conjunction with the ECALL(P) instruction, non-execution processing of a
subroutine program is performed when the execution command is turned OFF, enabling forcible turning OFF of the OUT
instruction and the PLS instruction (including P instructions).
In case the EFCALL(P) instruction is not used in conjunction with the ECALL(P) instruction, non-execution processing of
a subroutine program is not performed even if the execution command is turned OFF. Therefore, output status of the
individual coil instructions remains unchanged.
(4) Only the file name of a program file stored in the drive 0 (program memory/internal RAM) can be designated for a file
name.
(5) It is not necessary to designate the extension (.QPG) with the file name.
(Only .QPG files will be acted on.)
[File Name: ABC.QPG]
[File Name: ABC.QPG]
When EFCALL instruction is used
Forced OFF by FCALL instruction
When EFCALL instruction is not used
To Next Page
Loading...
