8 - 54
8. DEBUGGING FUNCTION
(2) Write the set trace device and trace condition to the memory card.
(a) Set the trace file and storage destination.
Set the drive number and file name at "1. ( ) Execute Trace & Display Status" on
"Program Trace" screen.
(b) Write the trace file to the memory card.
Write the trace file to the memory card by using "9. ( ) Write to PC (Condition)" on
"Program Trace" screen.
Since file names are used when writing to the memory card, multiple trace files
can be written.
To Next Page
Loading...
Need help?
General
