Mitsubishi Q2ACPU User Manual

13 - 4
13. PARAMETER LIST
Setting
Reference Section/Reference Manual
Default value Setting range
–– –
X 8k points
Y 8k points
M 8k points
L 8k points
B 8k points
F 2k points
SB 2k points
V 2k points
S 8k points
T 2k points
ST 0k point
C 1k point
D 12k points
W 8k points
SW 2k points
Fixed to X (8k points), Y (8k points), S (8k points), SB
(2k points), SW (2k points).
Up to 32k points per device within a range of 28.8k
words, including the above points
However, the total for bit devices is 64k points.
QnACPU Programming Manual (Fundamentals)
No setting 1 range only for each device Section 10.3
No setting 1 range only for each device Section 10.3
No setting 1 range only for each device QnACPU Programming Manual (Fundamentals)
–– -–
200ms 10ms to 2000ms (in 10ms units) Section 9.2
No setting 10ms to 2000ms (in 10ms units) Section 12.1.1
No setting 10ms to 2000ms (in 10ms units) Section 12.1.3
Checked Error checked Section 9.3
Stop Stop/Continue Section 9.3
No setting 5ms to 2000ms (in 5ms units) Section 10.2
Displayed Displayed/Not displayed
Section 9.9.2Not displayed Displayed/Not displayed
Not displayed Displayed/Not displayed
Stored in built-in RAM Stored in built-in RAM/specified history file Section 9.4
No setting 1ms to 2000ms (in 1ms units) QnACPU Programming Manual (Fundamentals)

Mitsubishi Q2ACPU Specifications

General

Brand	Mitsubishi
Model	Q2ACPU
Category	Controller
Language	English