Mobileye 6 - AUX Configuration

Technical Support
Mobileye 6  Technical Installation Guide_Rev0.3
Feb, 2016
Page 47 of 65
Mobileye Proprietary and Confidential
support@mobileye.com
6.1.4 AUX configuration
Signals connected to the AUX wire will need to be defined as such in the Mobileye
Setup Wizard application, Signal Sources step (10/17) during the system
configuration process (calibration).
*AUX wire connection is supported from Mobileye 6 Firmware version (2.10v1.5) or newer