Mobileye Proprietary and Confidential
support@mobileye.com
4.3 Test Drive
What you need to check while performing the test drive:
After the Speed indication has been verified and found to match the vehicle speed,
disconnect the system from the laptop according to these instructions:
Click
Disconnect the EyeCAN cable from the laptop.
Turn off the car and back on to reset the system.
Verify features functionality:
Drive behind a vehicle and verify vehicle detection (Green or Red car icon
on EyeWatch is available).
While driving on a safe road test the LDW functionality.
Attention So as not to endanger the installer, Mobileye does not recommend
testing FCW and PCW!
You completed installing and calibrating the Mobileye 6 system.
To Next Page
Loading...
